Product Description
BATON airsoft SRC MP5 CO2 GBB Airsoft gun series [JASG certified] (MP5A2)
-CO2 gas blowback MP5 series that allows you to enjoy vivid blowback regardless of the season
-CO2 gas gun certified by the manufacturing association "JASG Japan Air Sports Gun Promotion Cooperative" approved by the Ministry of Economy, Trade and Industry. * [SRC] MP5CO2 GBB series of his CO2 magazines are only his JASG certified products sold in our shop adjusted to Japanese specifications.
-Accessories: CO2 magazine, warranty card * CO2 12g cartridge is required for use (sold separately)
-Compatible CO2 cartridges: [PUFF DINO] or [JASG] CO2 12g cartridges (* Other brand CO2 cartridges are not supported and are not covered by warranty)
-* "CO2GBB" is a registered trademark of Baton Trading Co., Ltd. Registered Trademark No. 5942965: An airsoft gun that uses liquefied carbon dioxide when shooting. For toys.
Steel press upper receiver & early lower receiver "CO2" MP5
The H & K MP5 series, which is a standard high-precision submachine gun and has been adopted by law enforcement agencies in each country. Taiwan SRC modeled up as his CO2GBB, the upper receiver is a steel press similar to a real gun, and the lower receiver reproduces the initial type of "SEF". This model is a Japanese specification model that complies with the initial velocity regulation of 0.989J or less.
* BB bullet diameter / caliber: 6mm Bullet kinetic energy: 0.98J or less
CO2 magazine "tightens at once at the end"
MP5, a submachine gun that uses 9mm parevelum ammunition. He has a special structure that allows him to insert a CO2 12g cartridge into the thin magazine. The number of bullets is 35, but if you pack it to the end, it will interfere with the nozzle, so he should pull out one shot or install the magazine with bolt open for full bullets.
When inserting a CO2 cartridge, tighten the lid with your finger to stop it, and then use a coin or a large flat-blade screwdriver to tighten it once.
* If you tighten the lid slowly, gas will leak. If the raw gas leaks, the gasket will be cooled and damaged, and the "CO2 holder gasket" will need to be replaced. The CO2 case is fixed with the two pins in the photo, so he can access the CO2 holder (the part that receives the base) by punching out the fixing pin with a pin punch and removing the case. Adhere the CO2 holder gasket with an epoxy adhesive.
MP5's characteristic bolt lock operation is also possible
Of course, bolt open hold is possible with the charging handle lock unique to MP5. The charging handle is strong enough to be knocked down.
Hop adjustment is at the base of the outer barrel with the foregrip removed. Since it is a dial type, the hop does not go wrong during shooting and it is stable. Also, since the hop packing is his SRC original shape, it is not compatible with Tokyo Marui gas blow packing.
From the top, S: Safety, E: Semi-auto, F: Full-auto selector. The left side of the receiver is engraved with "Kal. 9mm x 19". Like a real gun, the selector does not enter safety when not cocked.
It is not good at full auto, but you can enjoy blowback even in winter
The number of bullets that can be fired with one CO2 12g cartridge is about 60 to 70 for semi-auto and about 50 for full auto. CO2 is strong against the cold, but when continuous shooting is done, he does not have high continuity of full auto because CO2 itself cools rapidly due to high pressure gas (*), and MP5 CO2 GBB also recommends operation centered on semi-auto.
* This is because the vaporization chamber is limited to a small space of a 12g cartridge, and the reason why this problem is solved and high full-auto continuity and stability is realized is that the entire magazine is the vaporization chamber [APS]. It is a CO2 magazine for DF / BH -BSP, and BLACK HORNET's high-speed full auto is intense.
The SRC MP5 is a light and sharp recoil, not the heavy and intense recoil of the previous CO2GBB rifles, the [VIPER TECH] AR series and the [WELL] AK74 series. It feels like the difference between a rifle bullet and a pistol bullet. The recoil is light, but thanks to the long nozzle type bolt, both the initial velocity and trajectory are more stable than the conventional gas blow rifle.