Product Description
NB EOTech set of EXPS3-2 replica QD mount model black & GEN3 G33 booster replica
-A unique circular reticle "EOTech EXPS3 Replica" and 3x "EOTech G33 Booster Replica" are included!
-G33 booster reproduces the inverted gimmick! Normally, it can be used as a 3X scope by pulling it down as a dot site at the same magnification and raising it as needed!
-The reticle emission color of the holosite can be changed to "Red / Green". The light intensity can be adjusted in 20 steps.
-G33 booster reproduces an inverted gimmick realistically. Switching between 1x and 3x is possible with a single touch.
Latest EOTech stamp! 2018New model HHS -Hologrphic Hybrid Sight set appearance
The latest real marking "EOTech EXPS3 replica" and "EOTech G33 booster replica" are now in a set!
EXPS-3 can be used as a dot site at 1x magnification, and can be used as a magnification scope of about 3x when viewed from a one-touch converter.
It often appears as special unit equipment such as NAVY SEALs and can be said to be the best set for M4, SCAR and HK416 / 417 series!
EXPS-3 Holosite Replica
The dots displayed on the lens are not dots, but “circular reticles” are displayed like the real ones. Supports quick aiming at close range. The light intensity can be adjusted in 20 steps, and the emission color can be changed to RED / GREEN.
With the latest EoTech stamp. The plate under the eyepiece is stamped. With realistic CAUTION sticker.
Compatible with various 20mm rail air guns. QD lever mount allows one-touch mounting on rails! Tension can be fine-tuned, so it can handle some rail errors.
Feature
-Body weight: Approximately 255g
-Overall length: approx. 93mm Height: approx. 69mm Width: approx. 53mm
-Height from rail top to under lens: approx. 30mm
-Battery used: One CR123A 3V lithium battery used (sold separately)
-Color: BK (Black)
G33 Magnifire Replica
EOTech 3rd generation 3.25 magnification magnifier replica.
It can be used as a 3X telescope when attached to the back of a dot site or a holosite replica series.
The Swich To Slide mount is also realistically reproduced and can be switched instantly with the magnification scope.
Compatible with various 20mm rail air guns. QD lever mount allows one-touch mounting on rails! Tension can be fine-tuned, so it can handle some rail errors.
The angle adjustment of the booster's top, bottom, left and right has been improved so that it can be adjusted by hand without using instruments.
You can adjust the focus to some extent with the dial on the eyepiece.
Three-dimensional EoTech engraved on the left and right of the booster, and the matrix code is reproduced on the front side.
Feature
-Length: Approximately 105mm
-Weight: about 340g
-Magnification: About 3 times
-Eye relief: Approximately 50mm
-Approximately 39mm in height from rail connection to booster lens center (approx. 46mm when using spacer)
-Color: BK (Black)
※Colors vary depending on the lot. The image and color may be different.
※There are some scratches and unevenness for overseas products.
※The air gun body in the image is sold separately.
※Since it is a replica, there is no real feeling or durability.