Product Description
AERITH BLACK V3XM Micro 3X Type Replica Magnifier Booster Scope Black with Mount Spacer Engraved G33 G43 UH1 VMX 3T micro3X
-Brand AERITH BLACK
-Color Black BK
-Maximum magnification 3 x
-Minimum magnification 3 x
About this product
★ Set contents ★ Micro3X body, 3mm spacer, rubber cap, fixing screws, hexagon wrench, AERITH BLACK tag, hard case (label may change)
★ Size ★ Overall length: Approximately 73 mm, Width: Approximately 50 mm, Overall height: Approximately 74 mm ・ Height from the rail to the center of the lens: Approximately 42 mm ★ Weight Approximately 259 g Focus can be adjusted with ★ Eye relief approx. 8 cm
important
-Although it disappears in the product image, it is engraved.
-Since this product is a telephoto booster, there is no aiming or dot projection by itself. Please use it together with various dot sites. If the aim is a single dot, the shape may look distorted due to the enlarged dot shape. EXPS3 and UH1 type circle dot shapes are projected properly.
-Please note that the dot may not come to the center just by adjusting the dial depending on the height and specifications of the dot sight. Please adjust the angle of the mount with thick paper or vinyl tape.
-If the dots do not move or cannot be adjusted at zero-in, one of the dials may be overtightened. Loosen both dials in a well-balanced manner and zero in.
-MICRO3X has a slight tilt, but this is a specification. We have confirmed it for all individuals. It does not affect the sighting.
-This is an example of mounting. The rifle body is not included.
-The package (hard case) may be partially damaged or scratched. There is no problem with the internal products. Please note.
-Although you can adjust up, down, left and right, there is a limit to the range of movement. If it is difficult to aim when mounted on an air gun, please use it by adjusting the angle of the base.
-The color may differ from the actual product depending on the monitor environment and settings.
-Even if it is a compatible model, it may be necessary to adjust it depending on individual differences.
-The 20mm rail may be tight depending on the model to be installed. It can be installed by scraping the inside of the mount with a file.
-If the dots do not move or cannot be adjusted at zero-in, one of the dials may be overtightened. Loosen both dials in a well-balanced manner and zero in.
MICRO3X operation method
MICRO3X has a slight tilt, but this is a specification. We have confirmed it for all individuals. It does not affect the sighting.
set content
MICRO 3X body
3mm spacer
Rubber cap
Each fixing screw
Hex wrench
AERITH BLACK tag
Hard case (label may change)
*The rifle gun is not included.