Product Description
AERITH BLACK UH-1 Type Replica Dot Sight Holosighte Black Engraved
-Although it disappears in the product image, it is fully engraved. The marking may be slightly different depending on the production lot. ★ Set contents ★ UH-1 main unit, Micro USB cable, lens cleaner, AERITH BLACK tag, hard case (label may change)
-Size ★ Overall length: Approximately 93mm Overall height: Approximately 67mm Width: Approximately 53mm Weight: Approximately 370g ★ Features ★ Adopts a characteristic reticle called EBR-CQB. It is composed of a line and a triangle in the direction of 3/9/12 o'clock centered on the center circle and center dot. Accurate shooting is possible.
-Brightness 10-step adjustment Turns on with the "+" and "-" buttons, turns off by pressing both the "+" and "-" buttons at the same time. If the surroundings are dark and the brightness is high, blurring will occur and halation will occur. If you adjust the brightness according to the brightness of the surroundings, the bleeding will disappear. Equipped with an automatic power off function when there is no key operation for about 2 hours
-Battery used CR123A, RCR123A, LFP123A battery x 1 (not included) ★ If you prepare and use a CR123A size rechargeable battery such as LFP123A separately, you can charge the battery directly using the Micro USB port of the main unit.
* Caution * Never charge a normal CR123A that does not have a charging function.
important
-Although it disappears in the product image, it is fully engraved. Depending on the production lot
-The package (hard case) may be partially damaged or scratched. There is no problem with the internal products. Please note.
-Although you can adjust up, down, left and right, there is a limit to the range of movement. If it is difficult to aim when mounted on an air gun, please use it by adjusting the angle of the base.
-The color may differ from the actual product depending on the monitor environment and settings.
-Even if it is a compatible model, it may be necessary to adjust it depending on individual differences.
-The 20mm rail may be tight depending on the model to be installed. It can be installed by scraping the inside of the mount with a file.
important
-Since the projection method is different from the actual holosight, the direction of the vertical adjustment dial is reversed.
-The adjustment direction of the left and right adjustment dial is normal.
-Zero-in adjustment can be done without any problem.
-Please note that the print is in the direction of the arrow as it is.
-If the dots do not move or cannot be adjusted at zero-in, one of the dials may be too tight. Loosen both dials in a well-balanced manner and zero in.
10-step brightness adjustment
Lights up with the "+" and "-" buttons, adjusts the brightness, and turns off by pressing both the "+" and "-" buttons at the same time. If the brightness is high, it will bleed and halation will occur. If you adjust the brightness according to the brightness of the surroundings, the bleeding will disappear. Equipped with an automatic power off function when there is no key operation for 2 hours
caution
* Batteries used CR123A, RCR123A, LFP123A batteries x 1 (not included)
* If you prepare and use a CR123A size rechargeable battery such as LFP123A separately, you can charge the battery directly using the Micro USB port of the main unit.
* Batteries are not built inside this product.
* Rechargeable batteries are not included.
* Never charge a normal CR123A that does not have a charging function.
* Depending on the type of rechargeable battery used and the power supply method, it may not be possible to charge properly.
set content
UH-1 body
Micro USB cable
Lens cleaner
AERITH BLACK tag
Outer box (label may change)
*The rifle gun is not included.