Product Description
BATON airsoft BM-9 CO2GBB Third lot M9A3 CO2 Airsoft gas gun Gunsmith BATON sticker included
-Brand BATON airsoft
-Color FDE
-Inner diameter 6
-Product weight 882 grams
-Air gun output type gas cartridge
About this product
BM-9 CO2 GBB which is a model upgrade of Beretta M9A3. * In the third lot (after September 2021) on sale, various parts have been improved to improve operational stability. For the magazine "Type-N" of CO2 cartridge holder gasket N with increased thickness.
Genuine adoption of TANIO / KOBA CO2 valve (patented) that achieves low fuel consumption and high durability. Reduced running cost, more stable initial velocity and improved accuracy. Approximately 120 shots can be fired with a single CO2 cartridge.
Accessories: BM-9 CO2 Magazine Type-N, Gunsmith BATON Sticker
Corresponding CO2 cartridge: [PUFF DINO] or [JASG] CO2 12g cartridge (* Other brand CO2 cartridges are not supported)
* A CO2 12g cartridge is required for use (sold separately)
A CO2 gas gun certified by the manufacturing association "JASG Japan Airsport Gun Promotion Cooperative" approved by the Ministry of Economy, Trade and Industry.
Detailed information
Color FDE
Packing size 28.1 x 19.2 x 4.6 cm; 882 g
Product description
BM-9 main
The product name is BM-9, but it goes without saying that it is a model upgrade of the BERETTA M9 A3. The slide and frame are made of resin by his BATON original mold, and together with JASG certification, it is a product that can be enjoyed with peace of mind in every aspect.
Two versions of FDE and BLACK are sold at the same time. The FDE color model realistically reproduces the color of the actual gun by combining the molding color (slide grip) and painting (frame / outer barrel). Although it is difficult to see in the photo, the frame has a metallic paint finish, giving it an atmosphere similar to that of a real gun that has been anodized. By the way, the BLACK model (both slide and frame are molded colors) is not the original color of Toy Gun, but there is a current product lined up as his M9A3 Black on the site of BERETTA USA.
* BB bullet diameter / caliber: 6mm Bullet kinetic energy: 0.98J or less
This is a CO2 magazine exclusively for BM-9, but the patented he adopted the TANIO / KOBA CO2 valve (TANIO / KOBA CO2 valve: Utility Model No. 3206631) and became his CO2 magazine with the highest performance in history. There is.
The threaded barrel peeking from the top of the slide, which has a large opening, is a metal outer barrel, and if you remove the cover of the muzzle part, he will see a 14 mm reverse screw. It is a nice specification to be able to install a tracer or silencer without preparing an adapter etc.
The dust cover under the frame is equipped with a 3-slot rail mount just like a real gun. Compared to his M9A1 which has only one slot, the range of lights that can be installed is expanding.
The rear sight is a Vertec (special model for the military and law enforcement agencies) type that is easy to aim at, but the front sight is a new form that has not been seen in previous models, and each has a white dat.
The area of the flat part on the upper surface of the slide on which the rear sight is mounted has expanded, following the Vertec type. It is a well-made design that does not spoil the Veretta-ness while improving the ease of aiming.
The safety lever provided on the slide functions like a real gun, but the decock function of the hammer is omitted.
In actual operation, when blowback begins and the slide lowers, the hammer is cocked, at which time the valve knocker, controlled by the angle of the hammer, retracts and cuts the gas flowing into the cylinder. In other words, the retreat speed slows down just before the slide goes down, reducing the risk of breakage. In addition to this structure, the large open slide is light, so the recoil feels milder than his conventional CO2 GBB hand gun, but with the effect of the Tanio Koba CO2 valve, the movement of the slide itself is extremely sharp.
When the slide is held open, it can be seen that the position of the magazine gasket (gas root packing) is higher than that of the conventional product. This seems to be a special design to improve airtightness. The sharp shaping of the reinforced resin slide is also a noteworthy point.
The grip is a straight type that was first adopted in his M9 series, and it also follows the Vertec model.
The trademark in the center of the grip panel, which reproduces the mold on the surface well, features three flat-blade screwdrivers for Beretta, which has three arrows as a motif. This wit-rich design was designed by Mr. Tazo Kobayashi, president of Tanio Koba, and creates a really fun and like-like atmosphere.
The products for sale come with a parts list like the one in the picture, and all the parts can be purchased at his Gunsmith BATON online shop. (* The CO2 valve cannot be disassembled, so it is sold as a set with the magazine body.) For heavy users who shoot hard, it is a pleasure to get parts at any time.
* A CO2 12g cartridge is required for use (sold separately)
