Product Description
BATON airsoft BH-USP Tactical CO2GBB JASG certified CO2 Airsoft gas gun Gunsmith BATON sticker included
-Brand BATON airsoft
-Color black
-Rotation speed 26
-Inner diameter 6
-Product weight 900 grams
-Air gun output type gas cartridge
About this product
Model up of USP Tactical 9mm. * BB bullet diameter / caliber: 6mm Bullet kinetic energy: 0.98J or less
Genuine adoption of TANIO / KOBA CO2 valve (patented) that achieves low fuel consumption and high durability. The running cost is reduced, the initial velocity is more stable and the accuracy is improved. Approximately 120 shots can be fired with a single CO2 cartridge.
Accessories: USP CO2 magazine [number of bullets: 26], Gunsmith BATON sticker
* A CO2 12g cartridge is required for use (sold separately)
Corresponding CO2 cartridge: [PUFF DINO] or [JASG] CO2 12g cartridge (* Other brand CO2 cartridges are not supported)
* A CO2 12g cartridge is required for use (sold separately)
A CO2 gas gun certified by the manufacturing association "JASG Japan Airsport Gun Promotion Cooperative" approved by the Ministry of Economy, Trade and Industry.
Detailed information
Color black
Packing size 28.2 x 18.9 x 4.7 cm; 900 g
Product description
H & K Polymer Frame Pistol USP. It is gaining popularity in the American market due to its external hammer and government-type operating system. It has been adopted by law enforcement agencies in various countries such as the Japanese Police Special Forces (SAT), the Ground Self-Defense Forces Special Operations Group, and the German Federal Army, and is also the base of the US Special Operations Command MARK23 (SOCOM Pistol). BH-USP Tactical CO2GBB is a model upgrade of "USP Tactical" equipped with a thread barrel for mounting a suppressor and an adjustable rear sight. The magazine is compatible with CO2 12g cartridges, imitating the 20-series magazine of the actual gun option. A Picatinny rail adapter that can be equipped with various options is also included.
-A product that has passed the product safety inspection with a CO2 gas gun certified by the manufacturing association "JASG Japan Air Sports Gun Promotion Cooperative" approved by the Ministry of Economy, Trade and Industry, which conforms to 0.98 joules or less specified by the revised Firearm and Sword Law. Resin slide.
-Genuine adoption of TANIO / KOBA CO2 valve (patented) that achieves low fuel consumption and high durability. The running cost is reduced, the initial velocity is more stable and the accuracy is improved. Approximately 120 shots can be fired with a single CO2 cartridge.
The metal outer barrel is a threaded type unique to the tactical model, and the thread part is a 14 mm reverse screw specification. The O-ring to prevent blurring is also installed after the groove is firmly carved. Notable is the inside of the outer barrel, where the polygonal rifling used by H & K in many products is reproduced.
* BH-USP Tactical Co2GBB has a short recoil mechanism, so if a heavy object is attached to the barrel, it will malfunction. If you are installing a tracer, please use a lightweight mini tracer.
The metal rear sight mounted at a high position together with the front can be adjusted up, down, left and right like a real gun. Like the front sight, the back of the sight blade is engraved with fine anti-reflection grooves. With CO2GBB, which has a strong recoil, the adjustable site may be out of order, but the click stop function of the adjustment screw is well reproduced, so you shouldn't have to worry about it.
The upper surface of the slide, which is mainly composed of flat surfaces, faithfully reproduces the design of the actual gun, including the pin hole mold. The extractor on the right side is an integrally molded mold, but it creates an atmosphere like that. The cocking serration at the rear of the slide, which consists of a thin convex surface and a wide concave surface, is a design common to H & K hand guns and enables smooth slide operation.
The wide curve trigger is a smooth type that supports double action and contributes to a smooth trigger pull. If you look at the slide stop lever, you may notice that the part where the slide is hooked is sharp, but since it is the inner bracket that actually receives the slide, you do not have to worry about extreme wear. ..
The magazine release lever at the base of the trigger guard is designed so that it can be operated from either the left or right, as you can see from below. Depending on the size of your hand, the thickness of your fingers, etc., you may feel pain when you change the magazine, but this is a feature common to H & K Auto, so devise an operation method for each. I want you to.
A Picatinny standard underrail mount is attached to the dust cover part at the tip of the frame, but by removing this with the hexagon bolt on the left side, a dust cover with a groove of H & K's original standard called Universal Mounting Groove can be obtained. appear. The original appearance of the USP is here, but since the types of weapon lights that can be attached are extremely limited, it is difficult to decide whether to use it in an easy-to-use manner or in a realistic manner.
The manual safety lever, which can be operated with the thumb of the right hand holding the grip, turns on the safety by flipping it up from the horizontal position, and shifts to a state where it can be fired by lowering it to the horizontal position. Also, like 1911, it is possible to use a cock and lock to apply safety while the hammer is cocked.
When you stop shooting with bullets remaining in the magazine, or when you move the slide forward from the hold open state where all bullets have been shot, pulling down the safety lever to the position of the yellow arrow will release the cocked hammer. It can be safely defeated (decocked).
As for the grip, the shape that gives the impression of being short up and down and long back and forth, and the rough non-slip molds on both sides are well reproduced. The checkered pattern on the front and back of the grip is a sharp one that is molded by making full use of the slide mold, and it firmly bites into the hand and fulfills its role.
Although it is a CO2 magazine, it is designed exclusively for BH-USP, which is not compatible with the magazine for BM-9 with the same 9 mm caliber, and has 26 bullets.
As for the output valve, the patented TANIO / KOBA CO2 valve (TANIO / KOBA CO2 valve: Utility Model No. 3206631) with anti-modification measures is adopted as before. To prevent modification, it is designed so that it cannot be removed with a normal valve wrench, and one PUFF DINO CO2 12g cartridge sold at Gunsmith BATON is continuous (with an interval of time to load bullets). It achieves good fuel economy of being able to shoot around 100 shots.
* A CO2 12g cartridge is required for use (sold separately)
