Product Description
ANS set of EO HD L3 X3 Scope booster and AIM COMP M3 dot sight
-EO HD L3 X3 Scope booster and AIM COMP M3 dot site. By using it as a set, it is compatible with short distance and long distance.
-The booster moves sideways with a single touch, so you can quickly operate the optical site and respond when the magnification is no longer needed.
-With the FTS mount, you can swing and remove the booster with one touch.
-This is a replica of COMP M3 that is a further evolution of AIM COMP M2, which was officially adopted by the military and police.
-This product is a replica product. COMP M3 requires a battery (CR2032 x1). (Battery sold separately)
※There may be scratches, rubbing, and rust on the steel part.
※The gun body in the image is sold separately.
※Some rails may not be able to be installed by opening and closing the lever. In that case, loosen the lock with the screw facing the lever, attach it to the rail, and tighten the screw.
※Dots that are not precision products may tilt slightly.
※There is a limit to the dot adjustment range. Therefore, please note that you may not be able to zero-in unless you adjust the angle of the body. If the dot does not match the gun's trajectory, it will not be an initial failure.
※If rattling or other irregularities occur due to the rail, adjust by inserting a spacer or masking tape.
※Depending on the arrival lot, there may be slight color differences and design differences.
