Laylax PROMETHEUS [EG hard gear frame (with dedicated spring guide) VER.2 mechanical box compatible 8mm bearing]

Product Description

Laylax PROMETHEUS [EG hard gear frame (with dedicated spring guide) VER.2 mechanical box compatible 8mm bearing]

-Compatible models: Compatible with Tokyo Marui Ver.2 mechanical box The shape of this product conforms to Tokyo Marui's Ver.2 mechanical box, but it is not a completely compatible product. This product is intended for advanced custom shops and custom shops, and depending on the model, some processing may be required or it may not be possible to use it.
-Specifications: ・ Bearing 8mm diameter Set contents ・ EG hard gear frame body ・ Dedicated spring guide ・ Hexagon socket head cap screw (M3 x 16) x 3 ・ Hexagon socket head cap screw (M3 x 8) x 6 ・ Grip set screw x 4・ Switching unit set screw x 1 ・ Cut-off lever set screw x 1
-A new proposal for a standard electric gun Ver.2 compatible mechanical box !! Based on the Tokyo Marui ver.2 mechanical box, this is a reinforced mechanical box with a completely revised structure and materials.
-Significantly reduces wiring damage caused by outside wiring! In consideration of damage to wiring caused by pinion gears, wiring can be passed through the outside of the mechanical box. A selector plate compatible with 8mm bearings is required.

● New proposal for standard electric gun Ver.2 compatible mechanical box !!
Based on the Tokyo Marui ver.2 mechanical box, this is a reinforced mechanical box with a revised structure and materials.

● Half-split structure with high maintainability!
By dividing only the right side of the mechanical box into upper and lower parts, the drive system and intake / exhaust system sections can be assembled separately, making it less likely that parts will shift when the mechanical box is closed.
Since it is not a completely split structure, it is easy to grasp the meshing of gears and the positional relationship of pistons, tappet plates, etc., and maintainability is improved.

● Greatly reduces wiring damage caused by outside wiring!
Considering the damage to the wiring by the pinion gear, the wiring can be passed through the outside of the mechanical box.

● Uses high-strength material! Clears 100,000 firing tests!
A high-strength material is used as the material, and a slippery Teflon coating is applied to the inside where there are many sliding parts. It has cleared 100,000 firing tests (our standard), and can handle not only standard settings but also high-load settings such as high cycles.

● The spring can be replaced without disassembling the mechanical box.
The Easy Access Spring Guide System allows the spring to be replaced without disassembling the mechanical box.
Thrust bearings are placed on the load surface in the dedicated spring guide to eliminate various resistances during spring compression.
The contacting guide uses a rotary tornado shaft made of a material with excellent self-lubricating properties and abrasion resistance.
This double smooth effect eliminates resistance and stress and maximizes the performance of the spring.

Set contents:
・ EG hard gear frame body
・ Dedicated spring guide
・ Hexagon socket head cap screw (M3 x 16) x 3
・ Hexagon socket head cap screw (M3 x 8) x 6
・ Grip set screw x 4
・ Switching unit set screw x 1
・ Cut-off lever set screw x 1

Specifications:
・ Bearing 8mm diameter

Compatible models:
Compatible with Tokyo Marui Ver.2 mechanical box
* The shape of this product conforms to the Ver.2 mechanical box made by Tokyo Marui, but it is not a completely compatible product.
* This product is intended for advanced custom users and custom shops, and depending on the model, some processing may be required or it may not be possible to use it.

Birth of LayLax mechanical box EG hard gear frame (with dedicated spring guide) Ver.2 mechanical box compatible / 8mm bearing

Only the right side of the mechanical box is divided into upper and lower parts.
By dividing only the right side of the mechanical box into upper and lower parts, each section of the drive system and intake / exhaust system can be assembled separately, so the trouble of parts shifting when closing the mechanical box is less likely to occur.

Cleared 100,000 launch tests
A high-strength material is used as the material, and a slippery Teflon coating is applied to the inside where there are many sliding parts. It has cleared the firing test of 100,000 shots (our standard), and can handle not only standard settings but also high-load settings such as high cycles.

Wiring damage is greatly reduced with outer wiring
By passing the wiring through the outside of the mechanical box, it has an outer wiring structure that takes into consideration the damage to the wiring due to the pinion gear.

Half-split structure with high maintainability
Since it is not a completely upper and lower split structure, it is easy to grasp the meshing of gears and the positional relationship of pistons, tappet plates, etc., and maintainability is improved.

With dedicated spring guide
A slide bearing is placed on the load surface of the spring guide in order to eliminate various resistances during spring compression. The contacting guide uses a rotary tornado shaft made of a material with excellent self-lubricating properties and abrasion resistance.
This double smooth effect eliminates resistance and stress and maximizes the performance of the spring.

Easy Access Spring Guide System
The swallowing can be replaced without disassembling the mechanical box. The easy access spring guide system allows the spring to be replaced without disassembling the mechanical box.

Easy to understand fixing screws
The screws that secure the frame are easy to understand. By marking the type of screw to be fixed, maintenance work can be done easily and smoothly.

For 8mm bearings
* Please use a selector plate that supports 8 mm. Tokyo Marui genuine selector plate, hard selector plate NEO, hard selector plate M16 series are not supported.