Product Description
AERITH BLACK UH-1 Type with VMX 3T Type Set Replica dot Sight Magnifire 3x Booster Scope Black with Mount Spacer Engraved UH1 3T (BK)
★ Although it disappears in the product image, it is fully engraved. The marking may be slightly different depending on the production lot. ★ Set contents ★ UH-1 main unit, VMX-3T main unit, Micro USB cable, fixing screw, hexagon wrench, simple manual, hard case (label may be changed)
★ UH1 size ★ Overall length: Approx. 93 mm Overall height: Approx. 67 mm Width: Approx. 53 mm Weight: Approx. 370 g ★ 3T size ★ Overall length: Approx. 108 mm Height from rail connection to lens center: Approx. (Including spacer) Magnification about 3 times ★ Focus can be adjusted with the dial on the eyepiece. ★ The reticle can be adjusted directly with the dials on the top (up / down adjustment) and side (left / right adjustment) of the booster body.
★ 10-step brightness adjustment Turns on with the "+" and "-" buttons, turns off by pressing both the "+" and "-" buttons at the same time. If the surroundings are dark and the brightness is high, blurring will occur and halation will occur. If you adjust the brightness according to the surrounding brightness, the bleeding will disappear. Equipped with an automatic power off function when there is no key operation for about 2 hours
★ Battery used CR123A, RCR123A, x1 (not included) ★ If you prepare a CR123A size rechargeable battery separately and use it, you can charge the battery directly using the Micro USB port of the main unit. * Caution * Never charge a normal CR123A that does not have a charging function. ★ Reticle adjustment can be done directly with the dials on the top (up / down adjustment) and side (left / right adjustment) of the booster body.
Although it disappears in the product image, it is fully engraved. The marking may be slightly different depending on the production lot.
-The package (hard case) may be partially damaged or scratched. There is no problem with the internal products. Please note.
-Although you can adjust up, down, left and right, there is a limit to the movable range. If it is difficult to aim when mounted on an air gun, adjust the angle of the base before use.
-The color may differ from the actual product depending on the monitor environment and settings.
-Even if it is a compatible model, it may be necessary to adjust it depending on individual differences.
-The 20mm rail may be tight depending on the model to be installed. It can be installed by scraping the inside of the mount with a file.
Since the projection method is different from the actual holosight, the direction of the vertical adjustment dial is reversed.
The adjustment direction of the left / right adjustment dial is normal.
Zero-in adjustment can be done without any problem.
Please note that the print is in the direction of the arrow as it is.
-If the dots do not move or cannot be adjusted at zero-in, one of the dials may be overtightened. Loosen both dials in a well-balanced manner and zero in.
Brightness 10-step adjustment Turns on with the "+" and "-" buttons, turns off by pressing both the "+" and "-" buttons at the same time. If the brightness is high when it is dark, it will bleed and halation will occur. If you adjust the brightness according to the surrounding brightness, the bleeding will disappear. Equipped with an automatic power off function when there is no key operation for 2 hours
Please note that the dot may not come to the center just by adjusting the dial depending on the height and specifications of the dot sight. Please adjust the angle of the mount with thick paper or vinyl tape. You can switch between 3x and 1x by tilting 90 degrees to the side while pressing the button.
Battery used
CR123A, RCR123A, LFP123A batteries x 1 (not included)
-If you prepare and use a CR123A size rechargeable battery such as LFP123A separately, you can charge the battery directly using the Micro USB port of the main unit.
* Batteries are not built into this product.
* Rechargeable batteries are not included.
* Never charge a normal CR123A that does not have a charging function.
* It may not be possible to charge properly depending on the type of rechargeable battery used and the power supply method.
* If something goes wrong during charging, stop charging immediately.
important
If the screws are loosened in various places, the opening / closing lock may not be applied.
Tighten the screws to fix it.
set content
UH-1 body
VMX-3T main unit
mount
3mm spacer
Each fixing screw
Hex wrench
Micro USB cable
AERITH BLACK tag
Hard case (label may change)
