Product Description
Evolution Gear Dot Sight Micro T1 & DD Micro Mount Replica Set 6068 Aluminum Alloy Hard Anodized
-Material Aluminum
-Manufacturer BTE
About this product
[Compatible air guns] ■ Compatible with all air guns with 20mm rails [Easy to install] ★☆☆☆☆ | * Air guns have individual differences in 20mm rails depending on the manufacturer, so depending on the compatibility, rattling may occur. In that case, please adjust it by inserting masking tape between the rail and the mount before use.
[Battery used] One CR1620 3V button battery is used. (Sold separately)
The Daniel Defense mount replica set is now available for the "Micro T-1" dot sight replica! It comes with a spacer about 6mm thick and a low mount, and the height can be adjusted in three stages. The T-1 body is reproduced at almost the same size as the real thing, and you can enjoy the ultra-realistic texture of 6068 aluminum alloy + hard anodized finish.
[Compact dot sight] Compared to the T-2 dot sight, it has a smarter appearance because there is no protrusion for attaching the lens cap. The protrusions on the eyepiece and objective lens are faithful to the real thing and have almost the same shape.
[Daniel Defense Micro Mount] A micro mount replica from Daniel Defense, USA is included. A spacer with a thickness of about 6 mm is included, and the height can be adjusted in two stages.
[6068 Aluminum Alloy] The body is made of "6068 aluminum alloy", a durable metal that is lightweight, highly corrosion-resistant, and is also used in aerospace parts.
[Hard anodized] The surface is beautifully finished with "hard anodized", which is resistant to scratches and abrasions, and has a matte texture and a luxurious feel.
[High-grade ruby coating] High-quality ruby coating and lenses are used, and the difference is almost indistinguishable when compared to the real T-1. The lens clearly displays a red dot. Compared to the real thing, the inner diameter of the tube is slightly narrower. Please note that this is a structural specification.
Detailed information
Material: Aluminum
Batteries included or built-in: No
Gender: Unisex
Product size: 4 x 7 x 7 cm; 293 g
Product description
Evolution Gear Micro T-1 with DD Mount Replica
A Daniel Defense mount replica set is now available for the "Micro T-1" dot sight replica!
A spacer with a thickness of about 6 mm and a low mount are included, and the height can be adjusted to three levels.
The T-1 body is reproduced at almost the same size as the real thing, and you can enjoy the ultra-realistic texture of 6068 aluminum alloy + hard anodized finish.
The ruby-coated lens is further polished, providing a clear field of vision that is almost the same as the real thing.
Compatible air guns
Compatible with all air guns with 20 mm rails
《Easy to install》★☆☆☆☆
Install by sliding it onto the 20 mm rail.
*Airgun 20mm rails vary by manufacturer, so there may be some rattling depending on the compatibility. In that case, adjust it by inserting masking tape between the rail and the mount.
Battery used
Use one CR1620 3V button battery. (sold separately)
Open the battery cap, insert the battery so that the positive terminal is toward you, and then close the cap again.
If the cap is hard to open, insert a coin or something into the groove and turn it.
Compact size
Compared to the T-2, it has a smarter appearance because there is no protrusion for attaching the lens cap.
The protrusions on the eyepiece and objective lens sides are faithfully reproduced and are almost the same shape as the real thing.
Daniel Defense Micro Mount
Includes a micro mount replica from Daniel Defense, USA.
A spacer with a thickness of about 6 mm is included, and the height can be adjusted in two stages.
■Absolute (Middle Mount)
Height from rail surface to reticle: Approx. 35mm
When assembled without spacers, the reticle is displayed at the same height as a typical M4 BUIS (backup iron sight).
■Lower 1/3 Co-Witness (High Mount)
Height from rail surface to reticle: Approx. 40mm
When the spacer is inserted, the reticle is displayed at a slightly higher position than the BUIS.
6068 Aluminum Alloy + Hard Anodized
The body is made of 6068 aluminum alloy, a lightweight, highly corrosion-resistant, and durable metal that is also used in aerospace parts.
The surface is beautifully finished with "hard anodized" that is resistant to scratches and abrasions, and has a matte texture and a luxurious feel.
Realistic Engraving
The side of the T-1 body is reproduced with a realistic engraving and white marking of the model name.
In addition, white marking is realistically reproduced on the side of the mount.
High-grade ruby coating
High-quality ruby coating and lenses are used, and the difference is almost indistinguishable from the real T-1.
The lens clearly displays a red dot.
The inner diameter of the tube is slightly narrower than the real thing. Please note that this is a structural specification.
Zero-in dial
Remove the two small caps on the main body to reveal the zero-in dial.
The dial can be adjusted using the buttons on the caps, so there is no need to carry around an adjustment tool, which is convenient!
The dial has a clicking sensation, making it easy to make fine adjustments.
If it is difficult to adjust with the cap, you can use a pair of thin-tipped round pliers to make the adjustment smoother.
Brightness adjustment dial
By turning the adjustment dial, which also serves as a battery box, you can fine-tune the brightness of the reticle to 11 levels.
The adjustment dial is thick and easy to turn even when wearing gloves.
If you set the light intensity to "11", it will be bright enough to be used outdoors on a sunny day!
*There is no NV mode.
Specifications
Weight: 128g
Material: 6068 aluminum alloy
Surface finish: Hard anodized
Battery used: 1 CR1620 3V button battery (sold separately)
Light intensity adjustment: 11 levels
Zeroing: Possible
Manufacturer: EvolutionGear
Set contents
T-1 dot sight replica body x1
DD micro mount replica x1
Low mount replica x1
Cleaning cloth, etc.
Notes
The lens cap may have some scratches or black stains.
Batteries are sold separately. Do not use worn or expired batteries as they may cause malfunction.
Airgun 20mm rails vary from manufacturer to manufacturer, and if the rail is thin, rattling may occur. In that case, insert masking tape between the rail and the mount to adjust the thickness before use.
*The airgun body in the image is sold separately.
*Batteries must be purchased separately.
